Download Firmware 1.6 Naze for Best Flight

Hey guys, I am besides working on a RTF drone with a naze32 lath that I flashed with two.ane.0 in january/18 I had to modify an esc simply the ver. on my FC wont support pass-through from Blheli and so I tin work on my esc. I see some newer firmware on cleanflight unstable from 3-3-18 has anyone used or heard anything on it. I really demand to go a pass-through upgrade or downwardly grade. also having a heck of a time getting ibus or ppm to piece of work with my fsi6b.

(This post was last modified: 04-Mar-2018, 01:08 AM past voodoo614.)

This is probably your all-time option. ESCs pass through was taken out due to flash size limitations.

https://github.com/cleanflight/cleanflight/issues/2946

What rev is your Naze32 controller? Might exist simpler to just reflash to Betaflight. I have a Naze32 full rev.6 running Betaflight 3.1.7 with Blheli pass through working.

Well i know information technology has been a little while since i have posted, i am going to come bace here as this is the aforementioned quad with the problem. To update i have completly rebuilt the rtf 130 quad with the naze32 fc that i was having a problem with. All of this is super astonishing, and turns out my Doc said this is great therapy for my paw anyway, the 130 frame is to small for some of the work i need to do. ? i know close upwardly cry baby. And so i have moved to a 180 and game on, i was finally able to flash and get working 3.25 with passthrough for Blheli. Finally have all the new motors with new motor gaurds, all turning in right direction. Wired for ibus with flysky i6b and flysky i6a transmitter with 10ch mod already flashed and working. My problem motor two will wind up on its on apon arming and not follow the other motors. Put props on and armed, flipped to right (2side). Re checked my props to ensure they were in correct place, reran esc calibration, even my tx throtlle hold switch didnt stop #2 esc. That was the original reason i started work on this quad many moons ago, later a crash #ii kept chirping even if i moved the lead, so certain supercede it. It was hard to wing and actually difficult to work on and that brings me to now. I havent tried moving esc notwithstanding but volition be outset step, exercise you have any other words of wisdom that may help?

well up appointment, I am running 3.10 betaflight. I moved motor ii to pin ane and motor 1 to pin 2 and motor 1 has the uncontrolled rampup. sadly it sounds like I take 2 choices one) remap motor 2 to pin5 and loose rssi or ii) buy a new f4 FC

I'd definitely go with option 2. Let us know if you need a recommendation on what to employ

Jones Knoonts

Download Firmware 1.6 Naze for Best Flight

DOWNLOAD HERE

Post a Comment for "Download Firmware 1.6 Naze for Best Flight"